by Minijenix
Build a Concrete Jungle Warzone
40+ Urban Warfare STL Models for 3D Printing, Tabletop Wargames, RPGs, and Post-Apocalyptic Campaigns
I recently purchased my first FDM printer, a standard A1. I found that it only takes a few bad layer lines in the wrong places, to ruin a whole print, so I decided to do a set where all of the more detailed parts could be printed separately. Which in turn opened the door for more customization.
This is quite a simple set with plenty of potential, the idea is you mix and match all your pipes, vents doors etc. but then can add little bits yourself like graffiti and wanted posters etc. I specifically went for a concrete theme so the models could be painted/primed with a spackle/filler/paint mix to give them a rough texture, which helps hide any layers lines without having to sand.
MIX N’ MATCH the upper floors, doors, windows, vents, pipes and other props. The upper floor and lower floor parts will have a little connection point, where you can either use magnets or glue them together.
Core Set: 40+ STL models for building a complete urban battlefield.
Ruined building walls, barricades, elevated sections and scatter terrain. Includes a variety of wall and prop combinations. Mix and match them how you like after printing.
5x Jersery Barriers (varying levels of damage)
4x Concrete Tank Blocks (varying levels of damage)
6x Bottom Floor Building walls (8inch x 4inch footprint)
4x Bottom Floor Building walls (6inch x 5inch footprint)
2x Bottom floor section (6inch x 4inch footprint)
8x Upper floor sections(all fit on the bottom floor sections above, with any combination)
3x Windows (varying levels of damage)
3x Pipes(various lengths)
1x Electrical outlet boxes
5x Miscellaneous ground floor damaged walls
FDM print-focused pieces designed for practical tabletop use, easy assembly, and flexible board layouts. The doors, windows and vents can all be printed flat on the plate. Some thin wires and pipes may be better printed with resin(or use real wire!).
SCALE Currently scaled to work well with grimdark future wargames. But everything can easily be scaled down 10% for 28mm or even 15-20% for 25mm games. The majority is support free apart from gaps for window frames etc.
MODULAR All of the doors, windows, vent and pipes print separately and can be placed in almost any way you like. There are some wall sections that have gaps in place for windows and open door frames, but any closed doors or shuttered windows(stretch goal) can be placed against any flat wall.
